合金鋼34CrNiMo6圓鋼是什么材料|34CrNiMo6棒材對應國內標準|材質34CrNiMo6化學成分 江蘇蘇州供應34CrNiMo6圓鋼價格，銷售圓棒34CrNiMo6材料多少錢一噸，上海、無錫34CrNiMo6現貨供應商報價，鋼材料34CrNiMo6是什么材料？浙江哪里有賣34CrNiMo6材質鋼棒料，鍛件34CrNiMo6鍛造圓鋼，電渣重熔34CrNiMo6鋼錠鍛打料。

34CrNiMo6因其優良的綜合力學性能,廣泛用于制造發動機的凸輪軸及連桿等重要零件,加工性較差,屬于典型的難加工材料.

②表面硬化結構鋼用以制造表層堅硬耐磨而心部柔韌的零部件,如齒輪、軸等。為使零件心部韌性高,鋼中含碳量應低，一般在0.12～0.25%，同時還有適量的合金元素，以保證適宜的淬透性。氮化鋼還需加入易形成氮化物的合金元素（如al、cr、mo等）。滲碳或碳氮共滲鋼，經850～950℃滲碳或碳氮共滲后，淬火并在低溫回火(約200℃)狀態下使用。氮化鋼經氮化處理(480～580℃)，直接使用，不再經淬火與回火處理。

SNCM220、20crnimo、SAE8620H、aisi4340、SNCM439、40crni2mo、40crnimo、36crnimo4、

34crnimo6、17crnimo6、18crnimo7-6、36crnimo16、40crmov4-6、40crnimo6、45crnimov、18cr2ni4wA、

15crmn、20crmn、16mncr5、20mncr5、20crmnti、30crmnsi、35crmnsi、20crmnmo、40crmnmo、SCM440、

SNB16、12crmov、12cr1mov、35crmov、40CrMoV、25cr2mov、25cr2mo1v、38crmoal、21crmov5-7、

31crmov9、SACM645、41cralmo7、30crmnti、20crni、40crni、45~50crni、12crni2、12crni3、14nicr14

、14nicr10、SNC415、SNC815、20crni3、30crni3、SNC631、37crni3、SNC836、15nicr13、17cr2ni2mo、

12cr2ni4、20cr2ni4A、3316、3325、8640、4720、14nicr18、20crni2mo、sae4320、SNCM420、25cr2ni4wA

、SAE8720，20cr~40cr、12~15crmo、20crmo、30crmo、35crmo、40~42crmo，42crmo4、20crmo4、4140、

4118、4135、SCM415、SCM420、SCM430、SCM435等產品多樣，規格齊全，也可根據客戶具體要求加工各種型

材，質優價廉。產品涵蓋：板、棒、環、管、帶、絲、鍛件等。
并可根據客戶要求的化學成分訂做：鋼錠、圓鋼、型材、鍛件等！2噸起訂，脫氧除雜、吹氬、脫氣、攪拌

，電爐、精煉爐、電渣重熔等冶煉方式！保成分，保探傷！

34CrNiMo6 because of its excellent mechanical properties, widely used in the manufacture of engine camshaft and connecting rod and other important parts, the machining is poor, which is typical of difficult processing materials.
Chemical composition
C carbon: 0.34
Si silicon: 0.25~0.30
Mn Mn: 0.5
Mo Mo: 0.2
Cr Cr: 1.5
Ni nickel: 1.55
34CrNiMo6 after quenching and tempering treatment, hardness of 36 ~ 40HRC, tensile strength, sigma B is 1 100 MPa, elongation was 12%, the impact toughness values of alpha kappa 8kg / cm2
Heat treatment:
34CrNiMo6 its quenching and tempering process for 850 degrees of 580 degrees of oil quenching tempering
Classification:
Quenched and tempered structural steel
Surface hardened steel
This kind of steel quenched and tempered [2] carbon content is generally about 0.25% ~ 0.55%, for established section size of structure parts, in quenching and tempering treatment (quenching and tempering), if along the cross section of the quenching through, good mechanical properties, if quenching impermeable, microstructure appears free ferrite, toughness decrease. The temper brittleness of the steel such as manganese steel, chrome steel, nickel chromium steel, tempering after rapid cooling. This kind of steel quenching critical diameter, with the increase of crystal size and the contents of alloy elements increases, for example, 40Cr steel and 35SiMn about for 30 ~ 40mm, and 40CrNiMo 30crni2mov steel about 60 ~ 100mm, commonly used in the manufacture of bear large loads of the shaft and the connecting rod structure.
The surface hardening structure steel is used to make the surface hard and wear resistant and the core of the heart is flexible, such as gears, shafts, etc.. In order to make the parts of the heart of the high toughness, steel, the carbon content should be low, generally in the 0.25% ~ 0.12, while the amount of alloying elements, to ensure the suitability of the quenching. Nitriding steel is also required to be added into the alloy elements (such as Al, Cr, Mo, etc.). Carburizing or carbon nitrogen co cementation steel, after 850 ~ 950 carburizing or carbon nitrogen, quenching and tempering at low temperature (about 200 c) state. Nitriding treatment (480 ~ 580), direct use, no longer after quenching and tempering treatment.東北特鋼、寶鋼、興澄特鋼、長城特鋼、重特、大冶、進口34CrNiMo6代理商批發商報價格，冷拉光亮34CrNiMo6銀亮材光圓。哪個鋼廠有生產34CrNiMo6圓鋼材料？出廠價34CrNiMo6生產廠家。國產/進口34CrNiMo6價格是多少？特鋼/合金鋼34CrNiMo6化學成分、力學性能。